
HM-PE PCM multiplexer
Humanity HM-PE PCM multiplexer can realizes telephone and customized services over E1.
The customized services are offered by 4 extra service slots. They are mainly used in public security, military, water conservancy, electric power, oil field etc.
Main Features
- Thunder-protection
- 24hours aging for stable performance.
- Customized flexible services over E1
Specifications
| E1 | Telephone(FXO/FXS/hotline) |
| One E1 with HDB3 codingRate: 2.048Mb/s±50ppmBoth with BNC (75Ω)and RJ45(120Ω)Fully comply with ITU-T G.703 | Connector: RJ45Impedance: 200Ω+680Ω‖0.1uFFrequency character: 300-3400Hz(-0.6-+3dB)Weighted noise: ≤-65dBmopInterface loop resistance: ≤1800Ω |
| Low speed Ethernet(option) | 2/4 wire EM(option) |
| Connector: RJ45Bandwidth: NX64Kbps,N=1-30MAC address list capability: 1024MAC address list aging time: 5 minutesThe minimum frame length: 64byte~2024byteVLAN: support VLAN transparent transmission | Input impedance: 600Ω2 wire RX signal A/D gain: 0db; TX D/A gain: 0db; 4 wire RX A/D gain: 7-14db, TX D/A gain: +4dbTolerance common-mode voltage in audio wire: 300VCMRR: better than 55db. |
| Magnet phone(option) | RS232(option) |
| Connector: RJ45Input impedance(normal non ringing status): 600ΩReturn loss: 40dBFrequency: 300-3400Hz(-0.6-+3dB)Ring voltage: ≤ 90VRing frequency: 20Hz to 90Hz | Connector: RJ45Transmitting output voltage: ±15VReceiving input voltage: ±15V The maximum rate of transmitting and receiving: 38.4Kbps |
| RS485(option) | V.35 |
| Connector: RJ45Receiver input sensitivity: maximum ±200mVReceiver output current, IO: ±10mA The maximum transmitting and receiving rate: 38.4Kbps | Interface: DCEConnector: DB25Rate: NX64Kbps, N=1-30 |
| Console management | Environment |
| Connector: RJ45For monitor and configuration | AC, DC, or AC+DC powerPower consumption: ≤30WWorking temperature: 0 ~ 70℃Relative humidity: ≤90%(25℃) |
Application Diagram
