Humanity HM-C200F/800F 4E1/8E1 to Ethernet converter realizes Ethernet transmission over 4/8E1.

This model complies with GFP, VCAT, LCAS and able to work with third party device followed same protocol.

• Realizes Ethernet transmission over 1-8E1
• Comply with ITU-T G.7041, G.7042, G.7043, G.8040. It’s able to work with third party device followed same standard ITU protocol. 

E1	Ethernet(3xelectrical, 1xoptical)
4E1/8E1Connector: DB37 Impedance: unbalanced 75Ω or balanced 120Ω Line code: HDB3 Comply with ITU-T G.703 standard Jitter comply with ITU-T G.823 standard DB37/8*BNC for 75Ω  DB37/4*RJ45 for 120Ω	4xEthernet with VLAN3x electrical Ethernet with RJ451xoptical Ethernet with FC/SCComply with IEEE802.3, IEEE802.1QAuto adapt 10/100M, full/half duplexSupport MDI/MDIXSupport flow controlMAC address table capability: 1024MAC address table aging time: 5 minutesMinimum frame length: 64bytesMaximum frame length: 1916bytes
LED indicators	DIP switch
POWEREthernet: LINK1-4E1: ALR, L01-L08, LOS,AIS,LOOP,LOF* ALR is general alarm* L01-L08 is for alarm E1 channel*LOS, AIS, LOOP,LOF alarm is controlled by DIP1-2, displayed by L01-L04.	DIP1,2: set alarm contents for L01-L04 DIP3: set E1 loop DIP4: set VLAN
Button	Management
Local/remote alarm choiceConsole/SNMP choice	Default with console managementSNMP option, please state when in order
Power	Environment
AC and DC powerLess than 10W	Working temperature: -5 ~ 50℃Relative humidity: ≤95%, non-condensing