Humanity RPM-150S4ET/8ET realizes 1-4E1/8E1+4Ethernet transmission over optical fiber line.

RS232, order wire phone, optical 1+1 redundancy, power redundancy is available for option.

• 1U 19inch with single board design.
• Optical 1+1 redundancy option to ensure stable performance.                                            
• 24 hours aging to ensure stable performance.
• Perfect alarms.
• Support ALS to protect eyes during installation.
• Power 1+1 option to ensure stable system.                         
• Console management available to offer.

Optical	E1
Optical rate: 150MbpsDual fiber, SM, FC, 1310nm, 40km(Default)Customized optical specificationsOptical 1+1 redundancy available for optionSupport ALS to protect eyes	4E1 for RPM-150S4T/4ET8E1 for RPM-150S8T/8ETConnector: DB37, DB37-BNC for 75ohm, DB37-RJ45 for 120ohm.(please inform us if imbedded RJ45 type is required)Impedance: unbalanced 75Ω or balanced 120Ω Line code: HDB3
Ethernet(option)	RS232
Available for RPM-150S4ET/8ET model4xEthernet with VLANConnector: RJ45Auto adapt 10/100M, full/half duplexSupport MDI/MDIXSupport stream controlMAC address table capability: 1024The minimum frame length: 64bytesThe maximum frame length: 1916 bytes	2channel RS232Connector: RJ45Maximum rate: 115.2Kbps
Order wire phone(option)	Button
Connector: RJ111channel order wire phone available for optionStandard 2-wire phone setBandwidth: 64KbpsCoding: PCM	Choose mask alarm voice or not mask alarm voice
DIP switch setting	Indicators
DIP1: set local/remote alarmDIP2: set VLANDIP3: set ALS enableDIP4: set LED maskDIP5: set E1 loop DIP6: set E1 local/remote loopDIP7: set fiber loop	Power: PLED1, PLED2Fiber: F1,F2,NOP,LOFE1: LOS1-8Error code: E-3, E-6
Management	Power & Environment
Connector: RJ45RS232 console management	Flexible power: AC, DC, AC+DCPower consumption: less than 10W Working temperature: -5 ~ 50℃Relative humidity: ≤95%, non-condensing