
HM-RS1010 STM-1 SDH multiplexer
Multiple service over STM-1 multiplexer realizes multiple service over STM-1 optical with 155.52Mbps.
3slots available to offer customized services.It’s with 1U 19inches, compact design and easy maintenance.
Main Features
- 1U 19inch design
- 2xSFP optical ports available for option
- 3x service cards available for option
- Maximum available functions for option: E1, 10/100M Ethernet, 10/100/1000M Ethernet.
- Supports Remote power Down Detection (RPD) and Auto Laser Shutdown (ALS)
Specifications
| Optical | Customized service slot |
| 2xSTM-1 optical interface Comply with ITU-T G.957 Date rate: 155.52Mbps Operation Mode: SDH/SONET Optical: SFP/LC Two optical available for 1+1 redundancy option Various loopback control for easy maintenance | 3xslots offered for customized services. Available cards: GE card: 1xGE port with RJ45, 1xGX port with SFP slot FE card: 4xEthernet ports with RJ45 E1 card: 8E1 or 16E1 |
| GE card for option(1xVCG,option) | 4channel FE card(option) |
| This card only insert in slot 3 1x optical GX and 1x electrical GE SFP module not offered by default Optical port support ALS Ethernet with MDI/MDIX, full/half duplex Support 1xVCG. Maximum available for 63xVC12(133Mb/s)Framelength:64bytes(minimum),1522/2036bytes(maximum) | This card only insert in slot 3 4channel 10/100M Ethernet available support VLAN Each port can relation to 1-4xVCG Each VCG can integrate 1-4xFE ports with flexible bandwidth to realize Ethernet transmission over SDH network |
| E1 card (option) | RS232 |
| These card can be insert in slot 1 and slot 2. 8E1 for one card. Maximum 16E1 available by 2 cards Connector: DB37. Accessory: DB37/BNC adapter offered for 75ohm or DB37/RJ45 adapter offered for 120ohm. | One channel RS232 available |
| Management | Environment |
| Support console and SNMP management | AC220V, DC-48V, AC+DC, AC+AC, DC+DC option Power range: -36~-72V DC, 176~264V AC Power consumption: 15W±10% Temperature: -5-50°C Humidity: -40~ 70%Non-condensing |
Application Diagram


